Black & Decker BDCMTTS Bedienerhandbuch PDF herunterladen (Seite 2)

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with

your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using

this attachment. Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

SPECIFIC SAFETY RULES

DANGER: Keep hands away from cutting area and the blade. Keep your second hand

on auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut

by the blade.

b) Do not reach underneath the workpiece. The guard cannot protect you from the blade

below the workpiece.

c) Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the

blade teeth should be visible below the workpiece.

d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to

a stable platform. It is important to support the work properly to minimize body exposure,

blade binding, or loss of control.

e) Hold power tool by insulated gripping surfaces when performing an operation where

the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will

also make exposed metal parts of the power tool “live” and shock the operator.

f) When ripping always use a rip fence or straight edge guide. This improves the accuracy

of cut and reduces the chance of blade binding.

g) Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.

h) Never use damaged or incorrect blade washers or bolt. The blade washers and bolt

were specially designed for your saw, for optimum performance and safety of operation.

CAUSES AND OPERATOR PREVENTION OF KICKBACK



















a) Maintain a rm grip with both hands on the saw and position your arms to resist

kickback forces. Position your body to either side of the blade, but not in line with

the blade. Kickback could cause the saw to jump backwards, but kickback forces can be

controlled by the operator, if proper precautions are taken.

b) When blade is binding, or when interrupting a cut for any reason, release the trigger

and hold the saw motionless in the material until the blade comes to a complete

stop. Never attempt to remove the saw from the work or pull the saw backward while

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL:  DANGER, WARNING, OR CAUTION.



DANGER: 

WARNING: 



CAUTION: 



1 2 3 4 5 6 7 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Black & Decker BDCMTTS Bedienerhandbuch Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kreissägen Black & Decker BDCMTTS