Black & Decker MULTI-GAS DETECTORS Bedienungsanleitung PDF herunterladen (Seite 48)

GasAlertMax

User Manual

Setting the Alarm Setpoints

Note

TWA, STEL, low, and high alarm setpoints are set

for each sensor in the following order: H

S, CO,

LEL, and O

TWA and STEL do not apply to LEL and O

The LCD first displays the TWA alarm setpoint for H

The set up/down arrow icon lights, prompting you to input a

new TWA alarm setpoint.

6. To change the TWA alarm setpoint, press H or G

until the LCD displays the new value.

7. Press C to save the displayed value.

8. Repeat steps #5 and #6 for the remaining alarm

setpoints and the remaining sensors.

Note

If you do not press any pushbuttons within 10

seconds of entering this display, the detector

automatically retains the existing alarm setpoint.

If you change the displayed value but pause for 10

seconds before pressing C, the detector rejects

the new value. The display shows Err (error) and

the audible alarm beeps six times. The detector will

then continue to the next value.

If the detector is on the last alarm setpoint and no

pushbuttons are pressed, the detector will exit

setting the alarm setpoints.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Keine Kommentare

Black & Decker MULTI-GAS DETECTORS Bedienungsanleitung Seite 48