Ensure the sweeper is switched off and the battery is
removed before attaching or removing the sweeper tubes. The
tube assembly must be assembled to the housing before use.
• To attach the inner tube to the sweeper, line
up the tube with the sweeper housing as shown in . Push
the tube into the sweeper housing until the lock button engages
the lock hole in the tube. Repeat this process for the outer tube.
always wear safety glasses. wear a filter mask if
the operation is dusty. use of rubber gloves and
substantial footwear is recommended when working
outdoors. for household use only.
warning: cut hazard. When turning the tool off for tube
installation or any other reason, wait 10 seconds for the fan to stop
rotating before disassembly.
• Always switch off and remove the battery when:
• The power supply cord has become damaged or entangled.
• You leave sweeper unattended.
• Checking, adjusting, cleaning or working on sweeper.
D
switching on and off (figure e)
To switch the sweeper on, slide the on/off
switch forward.
To switch the sweeper off, slide the on/off
switch back.
DO NOT POINT UNIT
DISCHARGE AT SELF OR BYSTANDERS.
Always wear safety glasses. Wear a filter mask if
the operation is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose clothing away
from openings and moving parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
Ensure the sweeper is switched
off and the battery is removed before
attaching or removing the sweeper tubes.
The sweeper tube must be assembled
to the housing before use. Install battery
after assembly just prior to use.
• Hold the sweeper with one hand as
shown in and sweep from side to
side with the nozzle several inches above
the hard surface. Slowly advance keeping
the accumulated pile of debris in front of
you.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern