Black & Decker KS600E Bedienerhandbuch PDF herunterladen (Seite 12)

different from those intended could result in a hazardous

situation.

5. Service

a. Have your power tool se rviced by a qualified repair

person using only identical replacement parts. This

will make sure that the safety of the power tool is

maintained.

Specific safety instructions for jigsaws

Hold the tool by the in sulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contactwitha "live"wirew illmake exposedmetal parts of

the tool "live" and shock the operator.

Use clamps or another pr actical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead toloss of control.

Keep hands away from cutting area. Never reach

underneath the work piece for any reason. Do not insert

fingers or thumb into the vicinity of the reciprocating blade

and blade clamp. Do not stabilize the saw by gripping the

shoe.

Keep blades sharp. Dull or damaged blades may cause

the saw to swerve or stall under pressure. Always use the

appropriate type of saw blade for the workpiece material

and type of cut.

When cutting pipe or conduit, make sure that they

are free from water, electrical wiring, etc.

Do not touch the workpiece or the blade

immediatelyafter operating thetool. Theycanbecome

very hot.

Be aware of hidden hazards, before cutting into

walls, floors or ceilings, check for the location of

wiring and pipes.

The blade will continue to mo ve after releasing the

switch. Always switch the tool off and wait for the saw

blade to come to a complete standstill before putting the

tool down.

This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised to

ensure they do not play with the appliance.

Warning! Contact with, or inhalation of dusts arising from

cutting applications may endanger the health of the operator

and possible bystanders. Weara dust mask specifically

designed for protectionagainst dust and fumes and ensure that

persons within or entering the work area are also protected.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

If the supply cord isdamaged, it must be replaced by the

manufacturer or an authorised Black & Decker service

centre in order to avoid a hazard.

Features

This tool includes some or all of the following features:

1. Variable speed On/off switch

2. Lock-on button

3. Dust extraction outlet

4. Shoe plate

5. Saw blade support roller

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Adjusting the saw blade support roller (fig. A & B)

Loosen the two screws (8).

Push thebladesupportroller (5)forwarduntil it touches the

back edge of the saw blade (7).

Tighten the two screws (8).

Fitting and removing the saw blade (fig. C)

Before fitting or removing the saw blade (7) the saw blade

support roller (5) mustbe adjusted to the rear position so

that it does not contact the blade.

Loosen (do not remove) the two screws (10).

Hold the saw blade (7) with the teeth facing forward.

Insert the shank of the saw blade (7) into the blade holder

(9) as far as it will go.

Slightly tighten the two screws (10) alternately to position

the blade, then fully tighten the two screws (10).

Adjust the saw blade support roller (5) as described above.

Toremove the saw blade (7), turn bothscrews (10) oneturn

counter-clockwise.

Connecting a vacuum cleaner to the tool (fig. D)

An adaptor (11) is required to connect a vacuum cleaner or

dust extractor to the tool. The adaptor (11) can be purchased

from your local Black & Decker retailer.

Push the adaptor (11) intothe dust extraction outlet (3).

Connect the vacuum cleaner hose (12) to the adaptor (11).

ENGLISH

1 2 ... 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Black & Decker KS600E Bedienerhandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kabellose Kettensägen Black & Decker KS600E